TedsWoodworking Plans and Projects

What are Jobsite Table Saws

Jobsite table saws are slightly bigger than bench top models and often are placed on a stationary or folding stand during work. The jobsite table saws are majorly used by carpenters, contractors as well as tradesman on the jobsite. Many of these jobsite table saws are more expensive unlike bench top saws which are typically in the region of $300 to $600, but way less than the hybrid models.

Most saws belonging to this category have small but strong 15 amp universal motors. Various higher end saws possess gear driven motors. Majority of these jobsite table saws are relatively light and can be transported to a job location with no stress. Also, many of these jobsite table saws are established more ruggedly and are usually more accurate than the entry level bench top brands.

The motors, cases and gears are usually created to better withstand the insults of construction sites. the comparisons between the jobsite table saws and the bench top saws explains the fact that various jobsite models have ¾ miter slots, better fences, sliding extension tables, better over alignment, larger rip capacities and lastly, folding stands with wheels.

Bosch GTS1041A-09 REAXX Flesh-Detecting Jobsite Table Saw with Gravity-Rise Wheeled Stand

Jobsite Table Saw Features

There are some features you need to know if you desire to use the jobsite table saw. These features will be listed and explained below as follows;

  1. Accuracy

We often hear the word accuracy when it comes to discovering the advanced table saws. The jobsite table saw has the capability of being calibrated and it must be the first thing you do after setting it up.

  1. Fence

Some of abilities states that the jobsite table saw possesses solid construction and wide cast front clamp, it also stays in one place while the rack and pinion system moves it into place. The jobsite table saw might not be perfect but it removes a lot of accuracy problems that come from locking the fence out of square on some systems.

  1. Portability

Portability boils down to a few of significant attributes. First and foremost, weight has a huge effect on how simply you can transport the table saw, especially if it has to move into the bed of a truck instead of a trailer. If you have got a trailer, then wheeled sand becomes your associate.

  1. Adjustments Mechanisms

Assuming that height adjustments were standardized, we probably expect each jobsite table saw to make them nearly identically. Observing the hood, we found numerous different ways, each with their own effect. Most of the jobsite table sw employ a bevel gear system that provides smooth and reliable performance. They mostly used solid metal gearing, threaded rod and plastic bevel gears.

If you desire to have a jobsite table saw, there are different models that you should go for. Some of these saws will be listed below along with their features.

  • RYOBI RTS2 1G

It comes in as the only table saw in the group under $200. It is light weight and compact. The throat plate makes use of magnets to hold it in place while leaving it simple to eliminate for blade access. Making use of a threaded rod to push the height adjustments up, you will observe it’s very simple and smoother on the way down.

  • KOBALT KT 10 15

This type of table saw features value pricing with a good rolling stand. This type of jobsite table saw felt like it was the weakest when pushing 2x PT material through. Not minding the ranking, it does not feel under powered. This model is valued at $279.

  • PORTER CABLE PCB222TS

The wheeled stand is a good quality for transportation and the adjustment wheel is a huge benefit over sliding the front height adjustment around. The only issue is the amount of play in the fence.

Other professional brands that can be placed under the most advanced jobsite table saws include;

  • MAKITA 2705X1
  • DEWALT DWE7499GD
  • RIDGID R4513
  • BOSCH 4100-09

We will be happy to see your thoughts

      Leave a reply

      Search