With a wide range of brands offering impressive table saws, it can be challenging for woodworkers to settle on a particular brand. If you do not have the time to compare Dewalt DWE7491RS vs Bosch 4100-10, this review is for you. With our expert’s advice, this can prevent you from buying one not fit for your needs and spending on something that cannot do the job right.
Dewalt DWE7491RS or Bosch 4100-10?
Features of Dewalt DWE7491RS and Bosch 4100-10
Designs of Dewalt DWE7491RS and Bosch 4100-10
These two jobsite table saws are similar. Dewalt DWE7491RS and Bosch 4100-10 are comparable in terms of mobile built. They both have wheels to enable users to transport them from one place to another easily.
However, this Dewalt table saw takes the lead because it adds stability and sturdiness to the mix. Instead of relying on wheels alone, it comes with a cage frame to withstand tough job site working conditions. Hence, it’s much less likely to shake around than its counterpart. This saw can also withstand several hours of intense woodcutting, as observed by our experts upon days of testing.
Weight and Size
When working with a jobsite table saw, our experts’ stance is clear: lighter is better. Lighter table saws correspond to mobile and convenient work tools. In the weight and size category, Bosch 4100 scores more.
The Dewalt DWE7491RS job-site table saw weighs a hefty 90 pounds. Bosch 4100 table saw, on the other hand, weighs only 60 pounds. The Bosch table saw still comes out on top with a measurement of 29 x 32 x 13.25 inches (lxwxh) in terms of table saws’ size. This is noticeably smaller than the Dewalt DWE7491RS with a measurement of 31 x 24.5 x 31 inches.
While Dewalt is heavier, the Bosch table saw is wider, which is an advantage as it gives more cutting space.
Motor and Power
A powerful motor with a consistent power source ensures that you can get the job done as quickly and as efficiently as possible.
The Dewalt DWE7491RS has a powerful 15-amp motor that rivals some of the market’s best table saws. The 15-amp motor helps you cut through wood very easily without wasting time on a job. The Bosch 4100-10 is no different. It comes with a 15-amp motor that provides the same level of performance.
Considering that they have the same amp motor, there’s no winner between the Bosch 4100-10 vs Dewalt DWE7491RS comparison in this section.
Speed: Dewalt DWE7491RS and Bosch 4100-10
The primary difference between the motors in the DWE7491RS vs Bosch 4100-10 is the speed.
The Dewalt DWE7491RS can hit an incredible speed of up to 4800RPM (rotations per minute). The Bosch 4100-10 is also fairly impressive. However, its 3850RPM (rotations per minute) doesn’t quite compare to Dewalt’s cutting speed. In this regard, the winner is clear and undisputed. Our team advises that you always go for tools with a better RPM motor like Dewalt’s.
Cutting Capacity
The cutting capacity or rip capacity also determines how well your table saw performs.
The Bosch 4100-10 has a maximum rip capacity of about 25 inches with its saw blade. However, it’s nothing compared to the 32½ inches narrow rip cuts capacity the Dewalt DWE7491RS offers.
Thus, the Dewalt DWE7491RS can handle larger materials. Its rip capacity is complemented by its 10-inch carbide blade size. So, in terms of cutting capacity, Dewalt DWE7491RS with its 10-inch blade comes out on top in this Bosch 4100-10 vs Dewalt DWE7491RS comparison.
Table Saw Stand
A table saw stand is important to your woodworking job as the saw itself. It provides stability and aids better movement if designed properly.
The Bosch 4100-10 comes with an innovative gravity rise wheeled stand. This gravity rise innovation gives you added comfort and stability. Moreover, its size, compared to previous editions, aids the saw’s portability. However, when working with a tool with a powerful motor, sturdiness, and stability are more important.
The Dewalt DWE7491RS has a four-legged rolling stand design. The rolling stand or worksite table allows you to work comfortably without the table saw shaking or being unsteady. Our experts consider this a plus point for Dewalt in the Dewalt DWE7491RS vs Bosch 4100-10 comparison.
Fence System of Dewalt DWE7491RS and Bosch 4100-10
When you’re making cuts, an excellent fence system is crucial. Like a miter gauge, it keeps your material in check to reduce mistakes to the bare minimum.
The Bosch 4100-10 vs Dewalt DWE7491RS y have different fence systems to achieve the same purpose. The former uses an efficient and unique square lock rip fence system. This rip fence allows you to operate with one hand.
Besides the miter gauge, the Dewalt DWE7491RS uses a rack and pinion fence system instead of a rip fence system. This rack and pinion system allows you to make smooth and quick fence adjustments accurately.
This Dewalt table saw also uses retractable telescoping fence/telescopic fence rails that are great for portability. The telescoping fence and miter gauge, among others, add versatility to the saw’s list of capabilities and make it even better for keeping your tools properly aligned.
Safety Features: Dewalt DWE7491RS and Bosch 4100-10
Every good and highly portable table saw comes with safety features. The best portable table saws often have a smart guard system for kickback protection.
Bosch 4100-10 table saw comes with a smart guard system. The System comprises a riving knife, anti-kickback pawls, and a saw blade guard. The riving knife prevents cuts from getting stuck to each other. On the other hand, the blade guard keeps your body a reasonable distance from the rotating blade.
Dewalt DWE7491RS does not have a smart guard system. Instead, it uses a push stick and a blade guard to keep you from all 10 inches of its blade. In this part of the Dewalt DWE7491RS vs Bosch 4100-10 comparison, Bosch 4100-10 table saw has the edge over Dewalt.
Dust Collection System
When cutting through the wood using power tools, it’s normal to deal with quite a bit of dust in the process. This could either leave your shop looking messy, reduce your visibility or hurt your eyes [1]. For these reasons, a good dust collection port is an essential consideration.
The Dewalt DWE7491RS has a 2-inch dust removal system. Besides this dust cleaning system of 2 inches, the table saw connects to a vacuum cleaner quite easily to help remove dust in your workspace.
The Bosch 4100-10 table saw, however, isn’t very buoyant in this area. Instead of relying on a ready-made dust collector, you might need to get a dust-gathering bag yourself. Essentially, the Dewalt DWE7491RS is the better of the two table saws in this Dewalt DWE7491RS vs Bosch 4100-10 comparison.
If you want an upgrade on your table saw, you can consider buying the top table saw dust collection system here.
Portability: Dewalt DWE7491RS and Bosch 4100-10
Your power tool should be portable, especially if you need to move it from one place/workshop to the other.
Our experts compared Bosch 4100-10 vs Dewalt DWE7491RS, and it’s evident that the former is better in terms of portability. It weighs less and has smaller dimensions too.
It has a gravity system for its stand, combined with the wheels, making it easier to move it from place to place. Finally, the stand is two inches shorter than most in the market. The Dewalt DWE7491RS table saw is large, and the wheels are slightly more tedious to set up.
Prices of Dewalt DWE7491RS and Bosch 4100-10
Price is another important thing you must consider before getting a table saw. Bosch 4100-10 table saw costs less than the Dewalt DWE7491RS table saw. In terms of affordability, Bosh 4100-10 is definitely a better choice.
Warranty
The Dewalt DWE7491RS comes with a 3-year limited warranty. This will suffice and help you make the most out of your table saw. The Bosch 4100-10, on the other hand, only has a 1-year warranty. With regards to warranty, Dewalt DWE7491RS provides a significantly longer duration, allowing you to easily resolve issues that may arise while using the product.
Overall Winner: Dewalt DWE7491RS
After several tests, our experts crowns the Dewalt DWE7491RS as the clear winner of this comparison. It has an excellent 2-inch dust removal system for maintaining cleanliness. It also comes with a 3-year warranty and can cut through a wood at 4800RPM. If you’re a professional woodworker looking to get jobs completed faster and more efficiently, Dewalt DWE7491RS would be a great choice for you.
Alternatively, you may also want to check out this Dewalt DWX726 Rolling Stand Review.
For other brand comparisons, you can check these pages too:
- Skilsaw SPT77WML-01 Review — A Top-Rated Wormdrive Circular Saw (2023) - March 27, 2023
- DeWalt DWS779 Review — Is it a Good Compound Miter Saw? (2023) - March 27, 2023
- DeWalt DCS571B Review — Is this Atomic Mini Circular Saw Good? (2023) - March 27, 2023
