Farmertec Holzfforma Chainsaw Review: Which is the Best? (2024)

If you buy something through our posts, we may get a small commission. Read more here.

We all know power tools, especially chainsaws, can leave a dent in your wallet. But here’s the scoop: you can snag a high-quality chainsaw without breaking the bank! Ever heard of Farmertec Holzfforma?

In this review, we’ll dive deep into the world of Holzfforma Chainsaws. We’ll put their budget-friendly models to the test and see if they’re up to the task. Stay tuned!

Premium Option
Holzfforma Blue Thunder G888
Editor’s Choice
Holzfforma Blue Thunder G660
Budget Option
Holzfforma G111
Holzfforma Blue Thunder G888
Holzfforma Blue Thunder G660
Holzfforma G111
• Max Speed: 11500 RPM
• Sprocket Nose Guide Bar
• Weight: 8 kg (Bare Tool)
• 2-stroke Engine
• Auto Oil Pump
• Fuel Tank Capacity: 27.9 fl oz
• Power Speed (Max): 13500 RPM
• Single Cylinder Two-Stroke Engine
• Power Rating: 7 HP
• Type: Gas-Powered
• Gas Tank Volume: 22 fl oz
• Engine Motor: 40MM Bore
• Horsepower: 5.3
• Power Source: Fuel
•Weight: 4.5kg
Premium Option
Holzfforma Blue Thunder G888
Holzfforma Blue Thunder G888
• Max Speed: 11500 RPM
• Sprocket Nose Guide Bar
• Weight: 8 kg (Bare Tool)
• 2-stroke Engine
• Auto Oil Pump
Editor’s Choice
Holzfforma Blue Thunder G660
Holzfforma Blue Thunder G660
• Fuel Tank Capacity: 27.9 fl oz
• Power Speed (Max): 13500 RPM
• Single Cylinder Two-Stroke Engine
• Power Rating: 7 HP
• Type: Gas-Powered
Budget Option
Holzfforma G111
Holzfforma G111
• Gas Tank Volume: 22 fl oz
• Engine Motor: 40MM Bore
• Horsepower: 5.3
• Power Source: Fuel
•Weight: 4.5kg

Reviews of the Top Holzfforma Chainsaws

1. Holzfforma Blue Thunder G660

If you’re a newbie user, getting a chainsaw that’s easy to assemble like Holzfforma Blue Thunder G660 is the best decision you can make. Besides being highly affordable than some alternatives from this brand, you can get this cutting tool to start in just a few kicks. 

This chainsaw, with its single-cylinder two-stroke engine, packs a punch. It breezes through thick chunks of wood like a hot knife through butter. Plus, with a power speed of 13,500 and a sturdy build, it’s perfect for serious commercial jobs too. Just imagine the possibilities!

What I Like

What I Don't Like

2. Holzfforma Blue Thunder G888

Running with 8.6 horsepower and 122 CC, Holzfforma Blue Thunder G888 is undoubtedly the most powerful chainsaw option in the brand’s selection. At first glance, anyone can tell this is a premium power tool because of its magnesium alloy exterior. 

It also has a strong handle grip made out of rubber. Because of this, users are given maximum control during the cutting operations. 

Given that it features an automatic oiler, the chain will remain well lubricated while in usage and will not cause any interruptions or damage to the unit in the long run. 

What i Like

What i Don't Like

3. Holzfforma G111 Gasoline Chain Saw

Another affordable option you can get from the brand is Holzfforma G111 Gasoline Chain Saw. It’s a great cutting tool to buy for light cutting tasks, given its 5.3 HP rating and 40MM bore engine motor.  

If you compare it to the previous options, there’s no doubt that this chainsaw is lighter. Thanks to its compact construction, users will find it easier to maneuver. 

You may not know, but heavier power tools have higher chances of giving users arm and hand fatigue[1]. It also comes with a top-handle design, further elevating its maneuverability during cutting operations. 

What i Like

What i Don't Like

4. Holzfforma 76.5cc Blue Thunder G466

I consider Holzfforma 76.5cc Blue Thunder G466 a decent backup chainsaw, given how it runs with 76cc 5.4 hp motor. Finding attachments and accessories that match this tool is easy as it’s highly compatible with models like  MS460 and MS046. 

Its smooth cutting operation is mainly owed to its automatic oil system, which also protects the chain from potential wearing and tearing.

This unit can house attachments from 20 to 32 inches guide bars, as long as it’s the sprocket nose type. Thanks to this feature, the chain can move swiftly with very little heat and power loss. 

What I Like

What I Don't Like

5. Holzfforma 71cc G372XP

You may not know, but many users of this brand compare Holzfforma 71cc G372XP to some Husqvarna chainsaw alternatives. As this unit weighs over 17 kg, it didn’t surprise me when I discovered that it runs with a 5.3 hp motor. 

Its compatibility for guide bars highly varies because this unit can match ones sized around 20 to 28 inches. The same applies to the cutting length it can execute, ranging from 50 to 70 centimeters. 

My only advice is to buy from authorized sellers because that’s the only way you can claim a home-use or commercial-use warranty for this product. 

What i Like

What i Don't Like

Holzfforma Chainsaws Buyer’s Guide

Power and Performance

Gasoline-powered chainsaws typically offer greater power and are suitable for heavy-duty tasks, while electric and battery-powered options are more convenient and environmentally friendly for lighter tasks.

Most options that we listed are gas chainsaws, so it’s expected that these tools can deliver more power and perform well even when faced with tough cutting tasks. 

However, it’s important to remember that powerful chainsaws carry heavier engines, which will not always perform well with tasks that require reaching overhead. 

Build Quality

As Holzfforma chainsaws house heavy motors, it’s only right that their construction is durable enough to handle tough cutting conditions. But since these are affordable options, don’t be surprised if you find some models with plastic exteriors.

Pricing

These chainsaw options can range from over $200 to $600, depending on the power and features the cutting tool can offer. If you’re familiar with the power tool market, you’d know that this price range is more affordable than other brands. 

FAQ

Are Holzfforma bars worth purchasing?

Holzfforma bars are worth purchasing if you’re looking for an affordable chainsaw attachment option. Although they are not the best bars in the market, they serve their purpose at a low expense. 

Can you use Holzfforma parts in Stihl or Husqvarna chainsaws?

I don’t recommend using Holzfforma parts in Stihl or Husqvarna chainsaws because this could revoke the product’s warranty. Kindly check the terms and conditions of your policy to confirm. 

These tools have compatibility specifications, so checking their label or user manual is recommended.

Is it possible to change Farmertec Holzfforma chainsaws?

Yes, changing Farmertec Holzfforma chainsaws is possible as these products are highly compatible with different chainsaw attachments. However, it pays to check the chain and bar length specifications to ensure you buy a part compatible with your chainsaw. 

Can you use Holzfforma saws in a chainsaw mill?

Holzfforma saws running with a 4 HP rating should suffice if you’re processing softwoods in a chainsaw mill. But if it’s hardwood lumber, it’s wise to use chainsaws with a 6 HP motor or higher. 

Where is a Holzfforma chainsaw made?

Holzfforma chainsaw is made and manufactured in China by Jinhua Farmertec Import & Export Co. Ltd. Their offerings mainly focus on the US power tool market, but their products are widely available worldwide. 

Is Holzfforma any good?

Yes, Holzfforma is good if you’re looking for a budget-friendly chainsaw alternative. Although it’s not made with premium materials like the ones from major brands, these tools offer a solid cutting performance and get the job done. 

my Top Pick For a Holzfforma Chainsaw:
Holzfforma Blue Thunder G660

After conducting these Holzfforma chainsaw reviews, I picked Holzfforma Blue Thunder G660 as the best option under the brand. Besides being affordable, this chainsaw packs a punch with its speedy performance. Plus, setting it up is a breeze! Trust me, it’s going to take your cutting game to a whole new level.

robert headshot

Robert Johnson is a passionate furniture maker & carpenter, sought after for his knowledge on the craft.
You’ve probably seen his down-to-earth wisdom in USA Today, Bobvila, Family Handyman, and The Spruce, where he has shared commentary and guidance on various woodworking topics.

Robert is the brain behind Sawinery, where he aims to share tips, tricks, and a passion for all things carpentry.

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Articles
Join our community on facebook and get 3 woodworking plans for free!