Husqvarna Carburetor Adjustment Tool: Where to Find and More

If you buy something through our posts, we may get a small commission. Read more here.

Is your Husqvarna carburetor acting up and in need of an adjustment, yet you can’t find the adjustment tool from the brand? Trust me, you’re not alone in this.

Due to certain federal and state regulations, Husqvarna isn’t allowed to make carburetor adjustment tools available to the public. But don’t worry, I have the answer to this dilemma. In this article, I’ll guide you through the marketplaces where you can find the perfect adjustment tools for your Husqvarna carburetor. Let’s dive in!

What is a Carburetor Adjustment Tool?

Carburetor adjustment tools are used for machines with 2-stroke or 2-cycle engines, such as a chainsaw, edger, trimmer, pole pruner, leaf blower, and more. Carburetor adjustment tools come in different sizes depending on the type of engine that needs adjusting.

Husqvarna chainsaw carburetor and black adjustment tool

Maintaining the correct carburetor adjustment is vital, especially for machines with 2-cycle engines. If your engine has a properly adjusted carburetor, it gains maximum power, extends longevity, emits lesser smoke, and transition smoothly to an idle state.  

You will need to adjust your carburetor using the appropriate tools if your engine does not start instantly, often stalls out, fails to accelerate smoothly, emits black smoke, and tends to use more fuel than usual.

Is There a Carburetor Adjustment Tool Available for Husqvarna Products?

If you have a Husqvarna machine that needs carburetor adjustment, you may want to use tools from Husqvarna to ensure compatibility. 

However, Husqvarna is not permitted by emission regulations agencies, specifically by the California Air Resources Board (CARB) and Environmental Protection Agency (EPA), to manufacture and sell carburetor adjustment tools to the public consumer. 

person holding a carburetor adjusting tool

Husqvarna carburetors that come with screws are tamper resistant or have limiter caps, and only authorized and certified dealers can perform the adjustment using the procedure provided by the manufacturer. 

But that does not mean you will find carburetor adjustment tools compatible with Husqvarna products. Many carburetor adjustment tools available in the market are also compatible with the brand’s products.

Where to Buy an Adjustment Tool for Husqvarna Carburetors

If you have difficulty finding adjustment tools for your Husqvarna carburetors, I’ve explored some stores boasting a wide selection of these elusive tools. There are different marketplaces where you can find adjustment tools compatible with your Husqvarna carburetors.

Here are some of the stores that have a massive selection of adjustment tools:


There’s a plethora of carburetor adjustment tools compatible with Husqvarna products out there. But one of the reasons I lean towards Amazon is the sheer variety they offer. 

You can save more if you choose the ten pieces carburetor tools set for 2-cycle engines, which are also compatible with your Husqvarna carburetors. They come with a toolkit, so all your tools are protected and easy to organize.

different applications on a computer screen

When you buy adjustment tools on Amazon, you can refer to the complete description to ensure they are compatible with your Husqvarna carburetors.

If you want to ensure they will work with your Husqvarna carburetors, refer to the product reviews. These reviews are reliable because these are the experience of those who have already purchased and tested the product.

If you need your adjustment tools immediately, Amazon can deliver them on the same day for free if you are a Prime member. If you are unsatisfied with your carburetor adjustment tools, you can return them within 30 days for a replacement or a full refund.


At Walmart, you can find almost everything you need, including adjustment tools for your Husqvarna carburetor. They offer a wide range of these tools at reduced prices, and you can even find many discount deals, allowing you to save more on your purchase.


In addition, these stores offer a broad spectrum of adjustment tools specifically tailored for your Husqvarna carburetor. Whether you’re in the market for individual pieces or an entire set, they’ve got you covered. 

And a pro tip from someone who’s been there: if you’re looking to maximize your savings, I’d highly recommend going for the tool set. Not only will it ensure you’re equipped for any adjustments, but you’ll also enjoy a better deal.

If you need the adjustment tools for the Husqvarna carburetor immediately, you can always visit their physical store to pick up your tools. But you can also order online and avail of the same-day delivery service. 

If the adjustment tools you bought are incompatible with your Husqvarna carburetor, you may return them within 90 days for a replacement or a full refund.


If you are looking for either brand-new or second-hand adjustment tools compatible with the Husqvarna carburetor, you will have a lot of options on eBay.

Husqvarna chainsaw carburetor

What I find the most comforting about buying on eBay is that you transact with the sellers and buyers’ community. Hence, it is easy to ask for advice if you are uncertain that the adjustment tool will work on your Husqvarna carburetor.

You can also avail of great deals on eBay using the auction feature. You can bid on your offer, and if the seller agrees, it will be delivered to you immediately.

Why Does a Carburetor Need Adjustment?

The carburetor controls the fuel and air supply to the engine [1]. It ensures the correct ratio of fuel and air before entering the engine.

As many factors affect the flow of fuel and air to the engine, like temperature and weather conditions, after some time, the carburetor will no longer be able to control the appropriate ratio. Therefore, you must manually adjust the carburetor. 

adjusting Husqvarna carburetor

The main goal of adjusting the carburetor is to attain the proper speed of the engine at idle and ensure that it runs smoothly. If the carburetor is not properly adjusted, the engine may consume more fuel, keep stalling, and not start smoothly. 


How do you adjust a Husqvarna carburetor?

You may adjust a Husqvarna carburetor through the idle mixture screw and idle speed screw to enhance the engine performance. 

However, you will need help from a certified service center if you cannot adjust the idle speed properly. Do not run the engine if the idle stop is not working properly.

(To ensure your machine runs smoothly, know more about the important parts of a chainsaw in this guide so you can handle them properly)


Getting the Husqvarna carburetor tuned just right is crucial for the seamless functioning of the engine. Thankfully, there are plenty of stores out there offering carburetor adjustment tools for Husqvarna models at reasonable prices.

Having these tools on hand can be a lifesaver. If your carburetor suddenly needs tweaking, you’ll be well-prepared and won’t have to endure any downtime. It’s all about ensuring efficiency and convenience.

robert headshot

Robert Johnson is a passionate furniture maker & carpenter, sought after for his knowledge on the craft.
You’ve probably seen his down-to-earth wisdom in USA Today, Bobvila, Family Handyman, and The Spruce, where he has shared commentary and guidance on various woodworking topics.

Robert is the brain behind Sawinery, where he aims to share tips, tricks, and a passion for all things carpentry.

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Articles
Join our community on facebook and get 3 woodworking plans for free!