I’ve always wanted a table saw that offers cutting precision, versatility, and compactness. But let me tell you, finding one with all those features is quite a challenge.
After trying out several table saws myself, I was particularly blown away by the Delta 36 725 and Ridgid R4512. In this Delta 36 725 vs Ridgid R4512 comparison, I’ll dive into which one gives you the best bang for your buck.
PRO TIP
Both the Delta 36 725 and Ridgid R4512 can be hard to find on the market these days. Click below to find more great options for a table saw!
Delta 36 725 or Ridgid R4512?
Features of Delta 36 725 and Ridgid R45412
Build and Size
Both table saw sizes are identical and similar to most compact table saws available in the market. Like most units, these table saws feature a cast iron table with similar dimensions to minimize vibration during use.
Both the Delta 36 725 and Ridgid R4512 come with inbuilt accessory slots for installing extra fences if you need support for larger works. Also, they come with an integrated dust port collection system that keeps sawdust at the barest.
Both table saws have a sturdy wheelbase that enhances portability and balance. You can conveniently move the table saw.
The most significant difference between the two is their weight. While the Delta table saw weighs roughly 200 pounds, Ridgid is 267 pounds. This means Delta 36 725 is more lightweight and would be easier to roll from one jobsite to the other than Ridgid.
Winner: Delta 36 725
Cutting Performance: Delta 36 725 and Ridgid R4512
I was genuinely impressed with the cutting performance of both table saws. They sliced through thick workpieces with ease and efficiency, all thanks to their durable 10-inch carbide-tipped blades.
The Ridgid R4512 can cut wood with a thickness of about 3.25-inch at 90-degree and a wood depth of 2.25-inch at 45-degree bevel. Additionally, it offers a 30-inch maximum rip capacity to the blade’s right and 15-inch to the blade’s left for more cutting accuracy.
On the other hand, the Delta 36 725 guarantees a depth cut of 2½-inch thick wood at 45 degrees and 3½-inch at 90 degrees. It also offers the same 30-inch maximum rip capacity to the blade’s right and 15-inch to the blade’s left to maximize cutting precision.
Both saws accept dado powerful table saw blades up to 13/16-inch width, giving a maximum depth cut of 1½-inch. However, you’ll have to get a dado insert to run it.
While both saws come with a well-designed fence and rail system, I personally felt that the Delta’s fence and rail system outshone Ridgid’s. Adjusting and aligning it on the rails was a breeze.
Also, the aluminum rails on R4512 might warp, making the fence adjustment and attaining the maximum rip capacity somewhat challenging. Since the Delta table saw’s rail is steel, warping is minimized.
I must mention, the ¾” miter gauge on both saws was a great feature. It reliably stopped in place during use, enhancing the cutting accuracy.
Winner: Delta 36 725
Delta 36 725 and Ridgid R4512 Speed
With a no-load cutting speed of 3,600 RPM, the Delta 36 725 is capable of effortlessly ripping through various materials, including metal and wood.
Comparatively, Ridgid R4512 cuts various stock sizes at 3,450 RPM, which is 150 RPM less than that of the Delta 36 725. However, you can adjust the two table saws’ cutting speeds to suit your preference. You can cut soft metals and plywoods at lower blade speed. This is one of the top table saws for novices, as well.
Winner: Delta 36 725
Power Source
Both table saws are AC powered, so you’ll be connecting the machine to a power source for use [1]. Also, both table saws’ motors are prewired for 120V for optimal cutting efficiency.
The on/off switch on both table saws work perfectly just like the power switch of Dewalt DWE7491RS we reviewed, although the on/off switch on Ridgid is smaller and located in a rather hard to reach position. Overall, there isn’t a big gap on this aspect when I tested Ridgid R4512 and Delta 36 725.
(Among the power tools that normally get confused with each other are table and circular saws. So, I crafted this comparison guide between table saws and circular saws for beginners. Read next!)
Safety Features
One of the essential aspects of impressive table saws are safety features. Table saws that offer a good amount of safety features will guarantee the user’s security during operation.
Both the Delta 36 725 and Ridgid R4512 have safety features that I truly appreciate. They’re equipped with blade guards, riving knives, and anti-kickback systems that really help reduce work hazards and kickbacks.
(To use table saws properly and safely, you should be aware of the common table saw injuries based on studies here. Read next!)
Motor & Drive Configuration
Both table saws come with a belt-driven 13-amp powered motor, capable of providing enough power to cut thick stocks in your table saw projects , metals, and other materials efficiently.
Delta 36 725 and Ridgid R4512 Setup
I haven’t experience any challenge assembling the Delta 36 725 table saw like most affordable table saws in the market. However, the process was slightly different with Ridgid, as setting it up wasn’t the smoothest.
Ridgid’s power cord was too short to reach the power source. Also, adjusting the rip fence was relatively difficult.
Winner: Delta 36 725
Delta 36 725 and Ridgid R4512 Price
Although both table saws are loaded with unique and essential features just like the Hitachi C10RJ or Dewalt DWE7491RS saws, they are reasonably priced. Their prices stand out from their competitors.
You won’t break the bank to purchase any of these budget-friendly table saws. Considering their price and features, I believe they’re a worthy investment.
Warranty
Both Ridgid and Delta table saws come with five years of limited warranty unlike the ShopSeries RK7240.1 with only two yeas limited warranty. This further proves that both saws are durable and trusted.
Overall Winner: Delta 36 725
While both products undoubtedly come with commendable features and ensure precise cuts, I firmly believe that the Delta 36 725 holds a slight edge in performance. My Delta 36 725 vs Ridgid R4512 tests have shown that the former is more precise in cutting and handling any light-duty to medium-duty jobs.
Furthermore, the wheelbase facilitates easy movement, and it comes at a budget-friendly price. More importantly, the well-designed steel rip fence ensures proper adjustment on the rail system for more accurate cuts.
- Black+Decker MM2000 Review — Is This Lawn Mower Worth it? (2023) - September 29, 2023
- Dewalt DWE575SB Review (2023) — Is it Worth it? - September 24, 2023
- DeWalt DCS369B Review (2023) — Cutting Edge Precision and More - September 23, 2023