Even if you have a trusted table saw, the work requires more than this power tool. You will still need the best accessories to support your tool to achieve excellent performance. Unfortunately, getting the right accessories can be a real challenge, you might pick unsuitable ones for the table saw. Therefore, our woodworking team compiled the best table saw accessories in this review.
Reviews of the Top Table Saw Accessories
1. Luckyway 2-Pack 10-Inch Miter/Table Saw Blades
A table saw is only as good as its blade. The durability and the tooth count will dictate the stock you can work with. The Luckyway Table Saw Blades come in 2-pack with a 30 and 60-tooth count blade. You can work with hardwood, softwood, MDF, laminate, and more with these two different edges.
Both blades are equipped with tungsten carbide teeth and a steel body. Tungsten carbide is a very durable material that is wear and heat-resistant. In addition, the blades adopt an ATB (alternating top bevel) tooth design that allows for an excellent finish.
2. Bora Portamate Mobile Base Kit
You need not have to purchase a table saw with a mobile base if you opt for a mobile base kit. Instead, transform your power tool into a portable table saw with this affordable frame and caster package. It saves you the hassle of purchasing an extension table if you can quickly move your saw to a place with more space.
The small accessories have a 400-pound weight capacity and are very easy to mount to your table saw. The locking levers are foot-operated and the setup is very low profile. The Bora Portamate Mobile Base Kit can also be used on router tables not limited to table saws.
3. Fulton Safety Woodworking Push Block and Push Stick Package
Keeping your fingers out of harm’s way is a necessity with table saws. A push block and stick can keep your digits from injury. The Fulton Safety Woodworking Package comes with a combo of 5 different pieces.
The combo pack has every push tool you need to work with, not only your table saw but router table, miter saw, cabinet saw, and more. The orange color that resembles that of safety cones is no coincidence. It’s a safety color chosen for maximum visibility. In addition, the foam pads on the bottom of each piece will give you more control as you feed the material through.
4. Fulton Precision Miter Gauge with Aluminum Miter Fence
Next up is a Fulton Precision Miter Gauge with an aluminum miter fence for angled cuts. It’s an excellent choice for crosscuts and comes with a miter slot locking system for continuous cuts. The positive stops on the miter gauge are set for standard angles. The tool gives you maximum stock support, and it comes with a spring-loaded pin lock for accuracy.
This miter gauge can do more than what a regular miter gauge without a fence can do. It even includes a reading tape for precise measurements for both the left and right sides.
5. Phenolic Zero Clearance Insert for Delta Uni-Saw Contractor | Large Grizzly and Other Table Saws
A zero clearance insert is used to reduce the size of the blade opening. Zero clearance inserts are essential for crosscuts that minimize tear-outs. Table saws go at high speeds and can result in rough cuts, but not if you have zero clearance inserts.
The Phenolic Zero Clearance Insert was made from solid and durable material. It is designed to be a snug fit for your table saw. There is a side screw and end screw to ensure its stability.
6. Oshlun SDS-0842 8-Inch 42 Tooth Stack Dado Set
Oshlun SDS-0842 Dado Blades are the best table saw accessories you need for bevel cuts, dado cuts, cutting grooves, and more. In this pack, you get 4 C-4 carbide blades that are excellent chippers. The carbide tips stay sharper for longer and are low maintenance. The package comes with a carrying case and the shims are included as well.
As full-bodied chippers, you can expect fewer vibrations and reduces friction when in use. This dado blade set can be used on sheet goods and slightly thicker materials to make the job easier without applying pressure.
7. The Dust Deputy Deluxe Anti-Static Cyclone Separator 5 Gallon Kit
Every woodshop needs a dust collection system, and there is no better technology than a cyclone separator. Our contractors find the Dust Deputy Deluxe Anti-Static Cyclone Separator to be very effective at cleaning dust particles. In addition, the dust collection system comes with more suction power than before and has a longer lifespan.
The benefits of the Dust Deputy don’t stop in your workshop. You can use it in other parts of your house to pick up pet hair, dust, debris, and even liquid! It’s all thanks to the centrifugal force of the cyclone suction system.
8. Rockler Tablesaw CrossCut Sled
The Rockler Table Saw Crosscut Sled is used to provide accurate angles for your miter and crosscuts. The indicators are very precise on the crosscut sled. You also get a zero-chip breaker on the right side of the crosscut sled, which is much more helpful than an old miter gauge.
You can remove the MDF fence if necessary if you need to replace it at any time down the line. Miter gauges are important for angled cuts, but a crosscut sled is a necessary tool for miter cuts, crosscuts, and more.
9. Klein Tools 935DAG Digital Electronic Level and Angle Gauge
A digital angle gauge helps you measure angles to get an accurate reading. The Klein Tools 935DAG can also be used at an electronic level. The large display with bright numbers increases the readability of the digital angle gauge in low-light working conditions.
The magnetic base attaches to magnetic surfaces such as piping, and even table saw blades. The placement of the power and hold buttons is very conveniently located for control. The small table saw accessory comes with batteries and a small carrying case and features an IP42 waterproof rating .
10. 4 FT Power Twist V-Belt
A power twist link belt like this Power Twist V-belt, is one of the best table saw accessories for reducing vibration on your table saw. Of course, you would have to switch out your old v-belt quite frequently, but this particular model is an industrial quality option that is very durable.
Made from polyurethane and polyester composites, the belt is resistant to chemicals, oil, and water. It works on old and new table saws and doesn’t require you to disassemble the drive components. In addition, the Twist V-Belt is compatible with not only table saws but also other woodworking tools.
Table Saw Accessory Buyer’s Guide
Material Quality and Durability
Whatever you choose to purchase to accompany your table saw, quality and durability are always top considerations. Our team of woodworkers says the ideal accessories will be worth the money and stay in your toolbox for years to come.
For example, an insufficient power twist link belt could develop bumps over time, become rigid and snap easily if it’s made from inferior materials.
In addition, plenty of essential table saw accessories that may come with your tools, such as a rip fence, blade guard, riving knife, and a throat plate. While you most won’t need to purchase these things, the ones that come with the product are usually made of plastic and a lot less robust.
A problem our contractors want to help you avoid is incompatibility. It won’t matter if you have the most reliable table saw accessory available if it doesn’t fit your table saw. Check the model numbers to see if the addition is a match for your tool model. Our professional team members also say you don’t always have to purchase the accessories.
For example, you can make your t-track and t-slots for feather boards if you’re in a pinch. However, to avoid any compatibility issues, our experts always tell consumers to check the measurements.
Price and Warranty
Don’t forget about the warranty. Even small tools and components for your table saw should come with a warranty. One year is pretty standard, but if you can find products with more extended insurance, our experts say that’s the best.
Table Saw Safety Reminders
Any table saw accessory should also have some sort of safety measure or accident prevention, but it’s important to remember to stay safe. Wear proper PPE (personal protection equipment), use excellent respirator for woodworking, take advantage of your tool’s dust collector, and know where the safety power switch is. You should also avoid loose clothing that could potentially snag on the blade.
A dust collector will reduce the chances of developing respiratory issues and give you a clear line of sight. Adequate lighting is also essential as it could be the difference between a near miss and an unfortunate accident.
What is the most important table saw accessory?
What are the two accessories for the table saw that cannot be used at the same time?
Our Top Pick For a Table Saw Accessory: Luckyway 2-Pack 10-Inch Miter/Table Saw Blades
Our team’s top choice for the best table saw accessory is the Luckyway 2-pack table saw blades. The combo option is easier on your wallet, and the two different tooth counts on each blade will expand your project and material options. In addition, the steel blades have tungsten carbide teeth, which are durable and easy to maintain than steel.